1
/
of
20
Honda
K Series ULTRA PRO Fully Ported Intake Manifold for 06-15 Civic Si Drive By Wire
K Series ULTRA PRO Fully Ported Intake Manifold for 06-15 Civic Si Drive By Wire
Regular price
$679.95 USD
Regular price
Sale price
$679.95 USD
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
K Series ULTRA PRO Fully Ported Intake Manifold for 06-15 Civic Si Drive By Wire
8TH GEN Si
9TH GEN Si
** COMES FULLY ASSEMBLED **
Comes with just about everything you need to bolt this onto your setup. Your car may require some tweaks to accommodate this manifold, but the installation is similar to any other 2 piece intake manifold.
Includes:
Fully Ported and Polished ULTRA PRO Manifold
Port Matched 74mm Drive by Wire Throttle Body Adapter
Thermal Intake Manifold Gasket
Thermal Plenum Gasket
74mm Thermal Throttle Body Gaskets (2)
Fitting for Brake Booster Hose
Fittings to connect PCV hose or plug the PCV hose hole (if not in use)
O-Rings for Injectors
Fuel Rail Bolts
Fits:
2006-2011 Honda Civic Si
2012-2015 Honda Civic Si
You will need your own coolant passage intake manifold adapter
Description:
We take an Ultra Style 2 piece intake manifold and give it the full Valex Racing treatment to transform it from a bit of a hot mess into a seriously nice intake manifold that makes some efficient power (and looks nice too).
Out of the box, these manifolds have some serious casting problems (see pictures).
Out of the box, these manifolds have some serious casting problems (see pictures).
To address this, we first disassemble the whole thing and get rid of the paper gaskets all together. We then fully port and polish the runners. The cylinder head side gets cleaned up and each runner gets fully ported and polished. The plenum side gets an aggressive port and polish to maximize airflow. Then we move out to the the throttle body opening. The factory casting is a smaller opening than most aftermarket throttle bodies so we open it up to 74mm, smooth it out, and polish it for cleaner airflow into the plenum. We also port match the drive by wire throttle body adapter to the 74mm throttle body opening. You can run a smaller throttle body than 74mm and you will still experience the improvement in airflow. The cherry on top is that we include a full Valex Racing reusable thermal gasket kit to replace those cheap paper gaskets.
All the porting, polishing and gasket kit would normally cost around $400, but in this kit, we are including all that for free.
-Brand New
-In Stock and Ready to ship!!!
-Free Shipping in the Continental US 48
(additional shipping charges apply for HI, AK, APO, AFO, PO Boxes, and US Territories)
International buyers are responsible for ALL customs, duty, and import fees. Shipping charges are for shipping only!
**** ALL returns are subject to a restocking fee equal to at a minimum the cost of outbound and return shipping charge ****
Share
