K Tuned Billet RSX Pro Shifter and Race Spec Shifter Cables

K Tuned Billet RSX Shifter / K Swap Shifter and K Tuned Race Spec Shifter Cables

Part #:
KTD-RSX-PR3 (shifter)
R-SFT-CAB (cables)

Fits:
2002-2006 RSX, 2001-2005 Civic EM2/ES, K-swapped EF, EG, EK, DC2

Description:
Shifter

The K-Tuned Billet RSX Shifter Box is a direct replacement for the oem 2002-2006 RSX-S shifter box which can also be used in many K-swapped cars.  The box has been designed to work with both factory and aftermarket shifter cables.  If you are currently using an oem shifter box you are probably already familiar with the excessive “play” or “looseness” that is found in the factory plastic box setup.  Our full billet design is extremely strong and designed to eliminate any flex or movement of the shifter unit. 

Our Billet Shifter Arm is integrated and has been redesigned to make fine adjustments to the spread of the “H” shift pattern.  Essentially this feature allows the user to widen the spacing between 1st, 3rd and 5th gear. Note that 2nd, 4th, 6th and reverse gears will also be spread apart when adjusted.  We have also developed a proper short shifter option that won’t damage or break the cable guides.  This is accomplished by making the shifter cable mounting point adjustable to correct the angle at the cable connection.  The shift lever and shifter ball are made from solid stainless steel and seated in a spring loaded brass socket.  This combination of stainless and brass allows the two materials to lap together while the springs push up and eliminate “play” at the ball.  The lever is fully adjustable in height and offset rotation.  Height can be adjusted up to 2” taller or shorter than stock and there is an amazing 90 different offset positions.

The Billet RSX Shifter has two different sets of mounting holes on the base so it can be easily bolted into several applications.  Mounted into a 2002-2006 RSX (outer holes) and it will still fit perfectly below the RSX center console.  It can also be used on most K-swapped cars that are using some type of shifter mounting kit (outer holes used again).  However, it also has a set of inner holes that will allow it to be installed directly on top of the interior exhaust tunnel without the need for a mounting plate.  In an EF/EG/DC2/EK the inner set of holes at the back of the shifter line up with the holes used for the factory D or B-series shift linkage.  Shave down the lip for the shift boot and drill 2 more holes for the front and you’re done.

Cables:
To go along with our popular Billet RSX Shifter Box we are pleased to offer our K-Tuned Race-Spec Shifter Cables and Trans Bracket set. This is another part that many of our vendors and customers asked us to make, so here they are. Our cables are a super strong and stretch resistant replacement for the weaker and failure prone oem 02-04 RSX-S cables. The overall length is the same as oem and they are compatible with all oem and K-Tuned Shifter boxes, as well as many other aftermarket shifter box options. Our cables are also more flexible than oem cables and feature the fit and finish that you have come to expect from K-Tuned products.

K-Tuned Race-Spec-Shifter Cables are made almost entirely of stainless steel, including the very important inner cable and all of the exposed cable guides. The outer cable is constructed with a low friction Teflon coated inner liner and polyethylene outer covering. Even the cable mounting ends are made from stainless steel and were designed with a threaded section to eliminate the need for the oem cable clips. However, take note that the oem clips can still be used if desired. Last are the rod end connections, these are fully adjustable and made from 6061 billet aluminum at all four ends. We made one minor adjustment at the gear selector, here we are still using a billet rod end, but we added a spherical Delrin insert to allow proper movement at this joint. Allowing this movement helps reduce possible cable bind during shifting. There is even a bonus, because we have also included our Billet Cable Bracket to make this a complete package. We are so confident in our shifter cable design that we even offer a 1 year replacement and limited lifetime warranty. If you are looking for the best K-series shifter cables available, your search is now over.

-Brand New in the box
-In Stock and ready to ship
-Free Shipping in the Continental US 48
(additional shipping charges apply for HI, AK, APO, AFO, PO Boxes, and US Territories)